1301 1.0

2.4GHz-2.5GHz, 25dBm Power Amplifier ...

1302 1.0

1Watts, 2.1-2.8GHz Power Amplifier ...

1303 1.0

3 -4.5 GHz Power Amplifier ...

1304 1.0

0.80-0.96 GHz 2Watts, 900MHz band Power Amplifier ...

1305 1.0

2-8GHz Driver Amplifier ...

1306 1.0

Driver Amplifier 8-16GHz ...

1307 1.0

2 to 6 GHz Low Noise Amplifier Broadband Amplifier High Performance Low Current, Low Cost High Gain...

1308 1.0

0.4-4GHz Wideband Low Noise Amplifier ...

1309 1.0

1.7 to 2.5 GHz PCS/WCDMA band Low Noise Amplifier ...

1310 1.0

1.7-2.5GHz Low Noise Amplifier with High OIP3 ...

1311 1.0

7-20 GHz Driver Amplifier ...

1312 1.0

LOW POWER VOLTAGE REF ...

1313 1.0

Low Dropout Voltage regulator ...

1314 1.0

3 to 10GHz Low Noise Amplifier for UWB Application ...

1315 1.0

4.9 to 5.9GHz Power Amplifier ...

1316 1.0

5 GHz Low Noise Amplifier ...

1317 1.0

2 TO 6 GHz Driver Amplifier ...

1318 1.0

0.1 to 1 GHZ Frequency Divider ...

1319 1.0

Low noise amplifier for 28-40 Ghz frequencies for 5G, satcom and other applications RFLN05C is a four stage low noise amplifier. It provide high gain over wide bandwidth,low Noise Figure, high isolation, stability. The LNA is designed...

1320 1.0

Low noise amplifier with lange couplers for 20-40 GHz frequencies for 5G , satcom and other applications RFLN03C is a three stage low noise amplifier with Lange Coupler at input & output side for perfect input and output matching to 50 ohms. It provides h...

1321 1.0

Driver Amplifier operating from 10 - 24 GHz and can be used in wide band application or to drive the high-power amplifier RFDA02C Driver Amplifier operates from 10 - 24 GHz and can be used in wide band application or to drive the high-power amplifier. The amplifier provid...

1322 1.0

Driver Amplifier operating from 1-16 GHz and can be used in wide band application or to drive the high-power amplifier RFDA07C Driver Amplifier operates from 1 - 16 GHz and can be used in wide band application or to drive the high-power amplifier. The amplifier provide...

1323 1.0

Driver Amplifier operating from 35 - 46 GHz and can be used in Ka / V band applications or to drive the high-power amplifier RFDA12C Driver Amplifier operates from 35 - 46 GHz and can be used in Ka / V band applications or to drive the high-power amplifier. The amplifier pro...

1324 1.0

Driver Amplifier operating from 35 - 39 GHz and can be used in Ka band applications or to drive the high power amplifier RFDA13C Driver Amplifier operates from 35 - 39 GHz and can be used in Ka band applications or to drive the high power amplifier. The amplifier provide...

1325 1.0

RF SPDT Switch from 10-30 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation RFSW01C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....

1326 1.0

RF SPDT Switch from 20-40 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation RFSW05C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....

1327 1.0

RF SP3T Switch used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation RFSW02C RF SP3T Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....

1328 1.0

Driver Amplifier operating from 24-30 GHz and can be used in wide band application or to drive the high-power amplifier RFDA06C Driver Amplifier operates from 24 – 30 GHz and can be used in Ka band application or to drive the high-power amplifier. The amplifier provides...

1329 1.0

Front End Module operating from 24 – 30 GHz and can be used in low power Ka band applications RFFEM01C Front End Module operates from 24 – 30 GHz and can be used in low power Ka band application. The input and output are matched to 50 ohms with...

1330 1.0

Front End Module operating from 2 – 7 GHz and can be used in S / C band for Wi-Fi 6 & SATCOM applications. RFFEM02C Front End Module operates from 2 – 7 GHz and can be used in S / C for Wi-Fi 6 & SATCOM applications. The input and output are matched to 50 o...

1331 1.0

Buffer Amplifier operating from 10-45 GHz and can be used in wide band application or to drive the high power amplifier RFBA02C Buffer Amplifier operates from 10-45 GHz and can be used in wide band application or to drive the high power amplifier. The amplifier provides...

1332 1.0

Up convert LO reject Mixer used in RF transceiver applications RFUD01C (UPC Mixer) is LO reject Mixer used in RF transceiver applications. The process used to design UPC Mixer is 0.1um GaAs pHEMT. This is singly b...

1333 1.0

Downconverter IR SSB Mixer used in receives RFDN02C (DNC Mixer) is IR SSB Mixer used in receive application. The process used to design DNC Mixer is 0.1um GaAs pHEMT. This Mixer employs two resi...

1334 1.0

Low noise amplifier with lange couplers for 24-42 GHz frequencies for 5G , satcom and other applications RFLN06C is a four stage low noise amplifier. It provides high gain over wide bandwidth, low noise figure, high isolation, stability. The LNA is design...

1335 1.0

Active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency RFDBL03C is an active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency within the IC to feed in and drive th...

1336 1.0

Active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency RFDBL04C is an active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency within the IC to feed in and drive th...

1337 1.0

DNC IR SSB Mixer used in transceiver applications RFDN03C (DNC Mixer) is IR SSB Mixer used in transceiver application. The process used to design DNC Mixer is 0.1um GaAs pHEMT. This Mixer employs two ...

1338 1.0

RF SPDT Switch from 20-40 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation RFSW04C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....

1339 1.0

Driver Amplifier operating from 37 - 40 GHz and can be used in Ka band applications or to drive the high-power amplifier. RFDA11C Driver Amplifier operates from 37 - 40 GHz and can be used in Ka band applications or to drive the high-power amplifier. The amplifier provide...

1340 1.0

Buffer Amplifier operating from 25-62.5 GHz and can be used in Ka / V band application or to drive the high power amplifier. RFBA01C Buffer Amplifier operates from 25-62.5 GHz and can be used in Ka / V band application or to drive the high power amplifier. The amplifier prov...

1341 1.0

RF SPDT Switch from 2-44 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation RFSW03C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....

1342 1.0

Single stage low noise amplifier from 2-6 GHz with flat gain, low Noise Figure, high isolation, stability. RFLN04C is a single stage low noise amplifier with flat gain, low Noise Figure, high isolation, stability. The LNA is designed to operate from 2-6 GHz...

1343 1.0

TSMC CL013LV 130nm Clock Generator PLL - 160MHz-800MHz The Clock Generator PLL is designed to multiply an input clock by an integer between 1 and 4096. It does not provide any deskew functionality. It cont...

1344 1.0

TSMC CL018G 180nm Deskew PLL - 55MHz-275MHz The Deskew PLL is designed to eliminate the skew between the output of a clock distribution tree and a clock reference. The PLL can also multiply the ...

1345 1.0

TSMC CL018G 180nm Deskew PLL - 110MHz-550MHz The Deskew PLL is designed to eliminate the skew between the output of a clock distribution tree and a clock reference. The PLL can also multiply the ...

1346 1.0

TSMC CL018E 180nm Deskew PLL - 130MHz-650MHz The Deskew PLL is designed to eliminate the skew between the output of a clock distribution tree and a clock reference. The PLL can also multiply the ...

1347 1.0

TSMC CL018E 180nm Deskew PLL - 65MHz-325MHz The Deskew PLL is designed to eliminate the skew between the output of a clock distribution tree and a clock reference. The PLL can also multiply the ...

1348 1.0

TSMC CL015G 150nm Deskew PLL - 130MHz-650MHz The Deskew PLL is designed to eliminate the skew between the output of a clock distribution tree and a clock reference. The PLL can also multiply the ...

1349 1.0

TSMC CL015G 150nm Deskew PLL - 65MHz-325MHz The Deskew PLL is designed to eliminate the skew between the output of a clock distribution tree and a clock reference. The PLL can also multiply the ...

1350 1.0

TSMC CL015LV 150nm Deskew PLL - 140MHz-700MHz The Deskew PLL is designed to eliminate the skew between the output of a clock distribution tree and a clock reference. The PLL can also multiply the ...