2001 1.0

SMIC 0.13μm 1.62~3.3v->1.2v 150mA Power Regulator Targeted in SMIC 0.13μm 1.2v/3.3v logic process, current design of Power Regulator is to provide 1.2v power supply which is regulated from the si...

2002 1.0

SMIC 0.13μm 5v-3.3v Power Regulator This IP is a Low-Dropout (LDO) 5V to 3.3V power regulator in SMIC 0.13μm 3.3V/1.2V Logic process. When it works in regulation region, the max rat...

2003 1.0

SMIC 0.13um 1.8V Power On Reset Present Power on Reset generates system reset pulses (POR18) when 1.8V power supplier (VIN18) is turned on. This IP can not operate stand-alone becaus...

2004 1.0

Sub-LVDS receiver followed by 1:4 de-serializer The S13V25_CCP2RX _01 recovers a serial bit stream containing image data and converts it to a 4-bit 1/4 rate word. The receiver defined in this IP is ...

2005 1.0

32:1 serializer followed by sub-LVDS drivers The CCP2 transmitter consists of a 32:1 serializer followed by LVDS drivers for transmitting clock (or strobe) and data. The LVDS drivers operate in s...

2006 1.0

SMIC 0.13um 1.2v APLL This IP is a programmable Analog PLL suitable for high speed clock generation. High speed VCO can run from 50MHz to 500MHz. By setting DM(5:0) and DN(...

2007 1.0

12-bit 1M Differential Rail to Rail SAR ADC The analog-to-digital converter uses Successive Approximation Register (SAR) architecture to achieve 12-bit resolution. The ADC includes a core intern...

2008 1.0

SMIC 0.13um 32KHz Crystal Oscillator This is a 32768Hz crystal oscillator specifically designed for ultra-low power application. The sole power supply is 3.3V, but it can be as low as 1.6...

2009 1.0

SMIC 0.13um 32KHz Crystal Oscillator This is a 32768Hz crystal oscillator specifically designed for ultra-low power application. The sole power supply is 3.3V, but it can be as low as 1.6...

2010 1.0

SMIC 0.13um 1.2v APLL This IP is a programmable Analog PLL suitable for high speed clock generation. High speed VCO can run from 50MHz to 500MHz. By setting DM(5:0) and DN(...

2011 1.0

SMIC 0.13um 1.2v/3.3v PLL This PLL is designed for audio clock generation. The reference clock is 12MHz crystal or the input clock. It supports 256*fs clock output, where fs is...

2012 1.0

SMIC0.13um 1.2V POR The present IP is a Power On Reset (POR) circuit without any external resistor or capacitor. Its power supply is 1.2v....

2013 1.0

SMIC 0.13um 3.3v-1.2v Power Regulator Targeted in SMIC 0.13um 3.3v Logic process, current design of Power Regulator is to provide 1.2v power supply which is regulated from the single 3.3v ...

2014 1.0

VCC Detector to detects 1.2V core supply, output 3.3V digital signal The present IP is a VCC Detector (VDT) circuit with normal operating voltage ranging from 1.08V ~1.32V. It first detects the core supply and then give...

2015 1.0

12-bit 8 Input 1M/200k SAR ADC) This analog-to-digital converter uses Successive Approximation Register (SAR) architecture to achieve 12-bit resolution. The IP includes a core intern...

2016 1.0

SMIC 0.13um 3.3v RC Oscillator The present IP is a RC oscillator with internal R and C to generate 32±20%KHz clock. Its power supply is 3.3V....

2017 1.0

mono 10bit SAR ADC This analog-to-digital converter (ADC) uses successive approximation register (SAR) architecture to reach 10-bit resolution. The ADC includes internal...

2018 1.0

SMIC 0.13μm 1.2v 200MHz Ring Oscillator The present IP is a Ring Oscillator which is controlled by external bias current from bandgap. Its output frequency is about 200MHz and it can be fair...

2019 1.0

SMIC 0.18um Clock Slicer Present IP (clock slicer) is to re-shape the sinusoidal clock signal to a proper CMOS signal before its delivery to digital logic....

2020 1.0

SMIC 0.13um 1.2v 200MHz Ring Oscillator The SMIC18_CODEC_01 specifies the design of a high-performance 16-bit stereo Audio CODEC for portable digital audio systems. The ADCs and DACs within ...

2021 1.0

3V-5V Charge Pump for USB OTG This is a 3V to 5V regulated charge pump that will provide up to 100mA output current. This charge pump mainly targets on the application in USB2.0 OT...

2022 1.0

CMOS 3 Channels 10 Bits 200MSPS+ Current-Steering D/A Converter The SMIC18_DAC_06B is a 3-channel, 10-bit resolution, high performance, low power, current-steering CMOS digital-to-analog converter (DAC). The input ...

2023 1.0

LVDS receiver, 650M, 5 channel The LVDS Receiver IP is designed to support Single Link transmission between Host and Flat Panel Display with up to SXGA+ resolution and Dual Link tra...

2024 1.0

650M LVDS transmitter, 5 channel The LVDS transmitter is designed to support Single Link transmission between Host and Flat Panel Display with up to SXGA+ resolution and Dual Link tra...

2025 1.0

Including PRG03,VDT01,POR03,ROSC01 To provide the solution of MMC cards, SMIC18_MMC_01_S is integrated together by four independent IPs: SMIC18_PRG_03, SMIC18_ROSC_01, SMIC18_VDT_01 and...

2026 1.0

including PRG03,VDT01,POR03,ROSC01 To provide a solution to the MMC cards, SMIC18_MMC_03_4IN1 is consolidated by four independent IPs: SMIC18_PRG_03_33T18V60_240mA, SMIC18_ROSC_01_55M, ...

2027 1.0

including PRG06,VDT07 and ROSC02 To provide a solution of the MMC cards, SMIC18_MMC_06 is consolidated by three separate IPs: SMIC18_PRG_06, SMIC18_ROSC_02, and SMIC18_VDT_07. It can ...

2028 1.0

Including PRG03, ROSC01 and VDT01B To provide a solution to MMC cards, SMIC18_MMC_07_3IN1 is consolidated by three independent IPs: SMIC18_PRG_03_33T18V60_240mA, SMIC18_ROSC_01_55M and ...

2029 1.0

combined PRG_03, ROSC_01C, VDT_01B To provide a solution to MMC cards, SMIC18_MMC_07B_3IN1 is consolidated by three independent IPs: SMIC18_PRG_03_33T18V60_240mA, SMIC18_ROSC_01C_55M an...

2030 1.0

VeriSilicon SMIC 0.13μm 1.2V/3.3V VPPIO_DUP_01 IO Library VeriSilicon SMIC 0.13um 1.2V/3.3V VPPIO_DUP_01 IO library developed by VeriSilicon is optimized for Semiconductor Manufacturing International Corporat...

2031 1.0

SMIC0.18um PLL This PLL is designed for audio clock generation. The reference clock is 12MHz crystal or the input clock. It supports 256*fs clock output, where fs is...

2032 1.0

SMIC0.18um PLL This IP is a programmable Analog PLL suitable for high speed clock generation. High speed VCO can run from 40MHz to 270MHz. By setting DM[4:0] and DN[...

2033 1.0

SMIC 0.18um 1.8v PLL This IP is a fixed divider Analog PLL suitable for high speed clock generation. High speed VCO can run from 40MHz to 270MHz according to the frequency...

2034 1.0

SMIC 0.18um PLL This IP is a programmable Analog PLL suitable for system clock generation. High speed VCO can run from 150MHz to 250MHz. By setting DM(5:0) and DN(7:0...

2035 1.0

SMIC 0.18um POWER_IP The IC Card Interface IP provides power supply for either 1.8V, 3V, or 5V Smart/SAM cards, and realizes level-shift between smart card controller and ...

2036 1.0

SMIC 0.18um Power-On Reset This is a Power-On-Reset circuit that generates a reset pulse when power supply is on. After the power V18 reaches a specific level, i.e., VTR, it wil...

2037 1.0

SMIC 0.18um 3.3v-1.8v Power Regulator Power Regulator, also called Voltage Regulator, is an on-chip device which converts an external high voltage power supply into suitable power supplies...

2038 1.0

SMIC 0.18um 3v/4.2v->1.8v Power Regulator Present IP is to generate 1.8v supply voltage from an external Button Cell or Lithium Battery. The Lithium Battery will be monitored automatically. Wh...

2039 1.0

SMIC 0.18um 3.3v-1.8v Power Regulator Power Regulator, also called Voltage Regulator, is an on-chip device which provides suitable power supply for the core by regulating the external high...

2040 1.0

SMIC 0.18um 5v-3.3v Power Regulator Based on SMIC 0.18um 3.3v/1.8v Logic Process, current design of a Power Regulator is to provide the 3.3v voltage output regulated from the 5v input su...

2041 1.0

SMIC 0.18um 5v-3.3v Power Regulator Based on SMIC 0.18um 3.3v/1.8v Logic Process, current design of Power Regulator is to provide the 3.3v voltage output regulated from a 5v input supply...

2042 1.0

SMIC 0.18um 5v-3.3v/1.8v Power Regulator Based on SMIC 0.18um 3.3v/1.8v Logic process, current design of the Power Regulator is to provide both 3.3v and 1.8v power supplies which are regulate...

2043 1.0

SMIC 0.18um PWM Boost DC/DC Controller This is a boost DC/DC switching controller that adopts PWM (Pulse-Width-Modulation) control scheme. It accepts input voltage (Vin) from 0.95V to 1.8V,...

2044 1.0

SMIC 0.18um Random Code Generator SMIC18_RCG_02 is to generate random code....

2045 1.0

SMIC 0.18um 1.8v RC Oscillator The present IP is a RC oscillator with one external resistor to generate 25~50 MHz clock. Its power supply is 1.8v....

2046 1.0

SMIC 0.18um 1.8v Ring Oscillator The present IP is a Ring Oscillator. Its output frequency is about 53 MHz. The frequency can be fairly accurate (+/-10%) by trimming the resistance. I...

2047 1.0

SMIC 0.13um 24M Crystal Oscillator This is a crystal oscillator specifically designed for low power application. It is configurable to suit for 2M~32MHz crystals working at fundamental ...

2048 1.0

SMIC 0.18um 1.8v Ring Oscillator Brief Specification The present IP is a Ring Oscillator. Its output frequency is about 55 MHz. The frequency can be fairly accurate (?0%) by trimming the resistance. Its ...

2049 1.0

SMIC 0.18um 1.8v Ring Oscillator The present IP is a Ring Oscillator. Its output frequency can be changed by adjusting the external resistor. Its power supply is 1.8v +/-10%. A bandga...

2050 1.0

SMIC 0.18um Reduced Swing Differential Signaling Transmitter This is an embedded bus transmitter for RSDS™ (Reduced Swing Differential Signaling) interface. RSDS is an intra-panel interface bus standard develope...