2101 1.0

0.4-4GHz Wideband Low Noise Amplifier ...

2102 0.0

Low Dropout (LDO) Capless Regulator 250mA - TSMC 7FF 1-VIA’s Linear Low-Dropout (LDO) voltage regulator IP is a capless LDO regulator which provides programmable precise voltage regulation across a wide ...

2103 0.0

UMC L55LP 55nm DDR DLL - 104MHz-520MHz The DDR DLL uses a reference clock to establish a time base in order to delay arbitrary (nonperiodic) strobe signals by precise fractions of the clock...

2104 1.0

1.7 to 2.5 GHz PCS/WCDMA band Low Noise Amplifier ...

2105 1.0

1.7-2.5GHz Low Noise Amplifier with High OIP3 ...

2106 1.0

7-20 GHz Driver Amplifier ...

2107 1.0

LOW POWER VOLTAGE REF ...

2108 1.0

Low Dropout Voltage regulator ...

2109 1.0

3 to 10GHz Low Noise Amplifier for UWB Application ...

2110 1.0

4.9 to 5.9GHz Power Amplifier ...

2111 1.0

5 GHz Low Noise Amplifier ...

2112 1.0

2 TO 6 GHz Driver Amplifier ...

2113 1.0

0.1 to 1 GHZ Frequency Divider ...

2114 0.0

UMC L55LP 55nm DDR DLL - 78MHz-390MHz The DDR DLL uses a reference clock to establish a time base in order to delay arbitrary (nonperiodic) strobe signals by precise fractions of the clock...

2115 1.0

Low noise amplifier for 28-40 Ghz frequencies for 5G, satcom and other applications RFLN05C is a four stage low noise amplifier. It provide high gain over wide bandwidth,low Noise Figure, high isolation, stability. The LNA is designed...

2116 1.0

Low noise amplifier with lange couplers for 20-40 GHz frequencies for 5G , satcom and other applications RFLN03C is a three stage low noise amplifier with Lange Coupler at input & output side for perfect input and output matching to 50 ohms. It provides h...

2117 1.0

Driver Amplifier operating from 10 - 24 GHz and can be used in wide band application or to drive the high-power amplifier RFDA02C Driver Amplifier operates from 10 - 24 GHz and can be used in wide band application or to drive the high-power amplifier. The amplifier provid...

2118 1.0

Driver Amplifier operating from 1-16 GHz and can be used in wide band application or to drive the high-power amplifier RFDA07C Driver Amplifier operates from 1 - 16 GHz and can be used in wide band application or to drive the high-power amplifier. The amplifier provide...

2119 1.0

Driver Amplifier operating from 35 - 46 GHz and can be used in Ka / V band applications or to drive the high-power amplifier RFDA12C Driver Amplifier operates from 35 - 46 GHz and can be used in Ka / V band applications or to drive the high-power amplifier. The amplifier pro...

2120 1.0

Driver Amplifier operating from 35 - 39 GHz and can be used in Ka band applications or to drive the high power amplifier RFDA13C Driver Amplifier operates from 35 - 39 GHz and can be used in Ka band applications or to drive the high power amplifier. The amplifier provide...

2121 1.0

RF SPDT Switch from 10-30 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation RFSW01C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....

2122 1.0

RF SPDT Switch from 20-40 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation RFSW05C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....

2123 1.0

RF SP3T Switch used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation RFSW02C RF SP3T Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....

2124 1.0

Driver Amplifier operating from 24-30 GHz and can be used in wide band application or to drive the high-power amplifier RFDA06C Driver Amplifier operates from 24 – 30 GHz and can be used in Ka band application or to drive the high-power amplifier. The amplifier provides...

2125 0.0

UMC L65LP 65nm DDR DLL - 164MHz-820MHz The DDR DLL uses a reference clock to establish a time base in order to delay arbitrary (nonperiodic) strobe signals by precise fractions of the clock...

2126 1.0

Front End Module operating from 24 – 30 GHz and can be used in low power Ka band applications RFFEM01C Front End Module operates from 24 – 30 GHz and can be used in low power Ka band application. The input and output are matched to 50 ohms with...

2127 1.0

Front End Module operating from 2 – 7 GHz and can be used in S / C band for Wi-Fi 6 & SATCOM applications. RFFEM02C Front End Module operates from 2 – 7 GHz and can be used in S / C for Wi-Fi 6 & SATCOM applications. The input and output are matched to 50 o...

2128 1.0

Buffer Amplifier operating from 10-45 GHz and can be used in wide band application or to drive the high power amplifier RFBA02C Buffer Amplifier operates from 10-45 GHz and can be used in wide band application or to drive the high power amplifier. The amplifier provides...

2129 1.0

Up convert LO reject Mixer used in RF transceiver applications RFUD01C (UPC Mixer) is LO reject Mixer used in RF transceiver applications. The process used to design UPC Mixer is 0.1um GaAs pHEMT. This is singly b...

2130 1.0

Downconverter IR SSB Mixer used in receives RFDN02C (DNC Mixer) is IR SSB Mixer used in receive application. The process used to design DNC Mixer is 0.1um GaAs pHEMT. This Mixer employs two resi...

2131 1.0

Low noise amplifier with lange couplers for 24-42 GHz frequencies for 5G , satcom and other applications RFLN06C is a four stage low noise amplifier. It provides high gain over wide bandwidth, low noise figure, high isolation, stability. The LNA is design...

2132 1.0

Active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency RFDBL03C is an active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency within the IC to feed in and drive th...

2133 1.0

Active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency RFDBL04C is an active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency within the IC to feed in and drive th...

2134 1.0

DNC IR SSB Mixer used in transceiver applications RFDN03C (DNC Mixer) is IR SSB Mixer used in transceiver application. The process used to design DNC Mixer is 0.1um GaAs pHEMT. This Mixer employs two ...

2135 1.0

RF SPDT Switch from 20-40 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation RFSW04C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....

2136 0.0

UMC L65LP 65nm DDR DLL - 104MHz-520MHz The DDR DLL uses a reference clock to establish a time base in order to delay arbitrary (nonperiodic) strobe signals by precise fractions of the clock...

2137 1.0

Driver Amplifier operating from 37 - 40 GHz and can be used in Ka band applications or to drive the high-power amplifier. RFDA11C Driver Amplifier operates from 37 - 40 GHz and can be used in Ka band applications or to drive the high-power amplifier. The amplifier provide...

2138 1.0

Buffer Amplifier operating from 25-62.5 GHz and can be used in Ka / V band application or to drive the high power amplifier. RFBA01C Buffer Amplifier operates from 25-62.5 GHz and can be used in Ka / V band application or to drive the high power amplifier. The amplifier prov...

2139 1.0

RF SPDT Switch from 2-44 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation RFSW03C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....

2140 1.0

Single stage low noise amplifier from 2-6 GHz with flat gain, low Noise Figure, high isolation, stability. RFLN04C is a single stage low noise amplifier with flat gain, low Noise Figure, high isolation, stability. The LNA is designed to operate from 2-6 GHz...

2141 3.0

Low Jitter 1.25GHz to 2.5GHz Quadrature Output PLL Terminus Circuits offers High speed, low Jitter PLL with 1.25GHz to 2.5GHz output. The ring oscillator based PLL provides balanced quadrature output. ...

2142 3.0

12 Bit Low Power AD Converter The IP is a 12bit fully differential successive approximation analog-to-digital converter. With a clock frequency of 5MHz a sampling rate of 200kS/s i...

2143 3.0

16 Bit Sigma Delta AD Converter This macro-cell is a single-channel 16-bit oversampling ADC intended for digital audio bandwidth applications. Supplied with 1.2V, the analog and the ...

2144 3.0

14 Bit Sigma Delta AD Converter Full-Scale Differential input from -320mV to +320mV Independent Conversion Output Rate 17.6kHz Active and Standby Quiescent current modes Programmable...

2145 3.0

60GHz Low Noise Amplifier The 60 GHz LNA is a low noise amplifier designed for applications in the 57 – 64 GHz frequency range. This product is well suited for wireless LAN an...

2146 3.0

60 GHz Power Amplifier The 60 GHz PA is a power amplifier designed for applications in the 57 – 64 GHz frequency range. This product is well suited for wireless LAN and poi...

2147 0.0

UMC L65LP 65nm DDR DLL - 78MHz-390MHz The DDR DLL uses a reference clock to establish a time base in order to delay arbitrary (nonperiodic) strobe signals by precise fractions of the clock...

2148 5.0

ISO/IEC 14443 type A/B Analog Front End (AFE) compliant with the NFC standards The ISO 14443 Analog Front End (AFE) is a fully integrated analog IP intended for Proximity Integrated Circuit Card (PICC)....

2149 5.0

Fully-integrated temperature monitor The Temperature Monitor is a fully integrated analog IP supervising the junction temperature (TJ) of the device....

2150 5.0

Fully-integrated programmable clock generator IP with embedded frequency monitor The Secure Clock Generator is a fully integrated mixed-signal IP securing the clocked system against side-channel attacks....