3451 1.0

SMIC 0.13μm 5V-3.3V 350mA Synchronous Buck DC-DC The IP is a high efficiency, low ripple, current mode buck switching regulator with internal synchronous MOS switches, eliminating the need for extern...

3452 1.0

VeriSilicon SMIC 0.13um 1.2V/3.3V OSC IO Optimized for Semiconductor Manufacturing International Corporation (SMIC) 0.13μm Logic Salicide 1.2/3.3V process, S13V25_OSCIO_02 provides a cry...

3453 1.0

VeriSilicon SMIC 0.13um 1.2V/2.5V OSC Optimized for Semiconductor Manufacturing International Corporation (SMIC) 0.13μm Logic Salicide 1.2/2.5V process, S13V25_OSCIO_02 provides a cry...

3454 1.0

SMIC 0.13um Low Leakage 1.5V 10Bit Dual 10~80MHz Single 20~160MHz ADC The VeriSilicon S13LLV33_ADC_10 IP is a 1.5V 10Bit pipeline analog to digital converter capable of running at up to 160MHz conversion rate in one chan...

3455 1.0

SMIC0.13um Voltage Detector The present IP is a VCC Detector (VDT) circuit. It detects the voltage level of its power supply AVDDH. The normal operation voltage levels of AVDDL a...

3456 1.0

CMOS 1-Channel 10-Bit 200MSPS+ Current-Steering D/A Converter The S13LLV33_DAC_03 is a 1-channel 10-bit resolution, high performance, low power, current-steering CMOS digital-to-analog converter (DAC). The input ...

3457 1.0

SMIC 0.13um Low Leakage APLL This IP is a programmable Analog PLL suitable for high speed clock generation. The high speed VCO of this PLL can run up to 1000MHz. It contains a 64 ...

3458 1.0

SMIC 0.18um 1.8v APLL This IP is a programmable Analog PLL suitable for low frequency reference clock and large feedback clock divider. It contains a 1-32 input clock divid...

3459 1.0

SMIC 0.18µm 5v-3.3v/1.8v Power Regulator Based on SMIC 0.18μm 3.3v/1.8v Logic process, this design of Low-Dropout (LDO) regulator is to provide both 3.3V and 1.8V supplies that are regul...

3460 1.0

SMIC 0.18um 3.3V Trimming Block This IP is suitable for voltage trimming. It provides 3 trimming bits and assures high reliability for trimming success. Before trimming, the output p...

3461 3.0

Low-leakage LDO in TSMC 40 ULP to supply logic and analog domains (up to 5.5V input supply) Low-leakage LDO in TSMC 40 ULP to supply logic and analog domains (up to 5.5V input supply) with programmable output voltage from 0.55 up to 3.3V....

3462 1.0

GSMC 0.13um Low Power Process Delay Cells G13LPV33_DELAYRC_01 is to generate rise/fall delay ranging from 0.15ns to 5ns....

3463 1.0

GSMC 0.13μm Low Power Process 2.6~3.63v -> 1.5v Power Regulator Targeted in GSMC 0.13μm Low Power 1.5V/3.3V 1P6M process, current design of Power Regulator is to provide 1.5v power supply which is regulated fr...

3464 1.0

GSMC 0.13μm Low Power Process VCC Detector This IP contains two Voltage Detector (VDT) circuits and a Power-On-Reset (POR) circuit. The voltage detectors monitor the supply voltage of Bus Suppl...

3465 1.0

GSMC 0.13um 1.5v APLL This IP is a programmable Analog PLL suitable for high speed clock generation. Its high speed VCO can run from 60MHz to 160MHz. The output frequency i...

3466 1.0

GSMC 0.13um Low Power e-Flash 1.5V POR This IP is a Power-On-Reset circuit, it detects the voltage level of POR_VDDC port, when VPOR_VDDC rises higher than the threshold VPOR, POR outputs a...

3467 1.0

GSMC 0.13um 5v-3.3v&1.5v Power Regulator This IP is a Low-Dropout (LDO) 5V to 3.3V&1.5V power regulator in GSMC 0.13um low power 4P5M e-flash dual gate process. The max output currents are 60...

3468 1.0

GSMC 0.18um General Process, Low Power circuit design, Diffusion ROM Based on GSMC 0.13um 1.5V/12V eFlash process, current design of the IP detects light with photodiode. When the incident light power is more than 70mW/...

3469 1.0

VCC Detector (VDT) circuit - voltage level of I/O (VIN) Detection The present IP is a VCC Detector (VDT) circuit, which prevents the possibilities of causing Flash writing failure or internal operation failure by uns...

3470 1.0

This IP is specially designed for anti-tamper protection which includes both current sense & voltage sense. This IP is specially designed for anti-tamper protection. It supports both current sense mode and voltage sense mode. The current mode provides curren...

3471 1.0

GSMC 0.18um 11Bit 500Ksps R2R DAC GSMC18_R2RDAC_04 is a 11Bit 500KHz DAC IP. It implements an 8-bit (from D [0] to D [7]) R2R_Ladder and 3-bit thermometer decoder architecture. It is s...

3472 1.0

GSMC 0.18μm 3.3v-1.8v Noise Current Source GSMC18_NCS_01 is a Noise Current Source IP. It depicts a current consumption block controlled by random code to draw 0mA~3.2mA noise current consumpti...

3473 1.0

GSMC 0.18um 3.3V Power on Reset The present Power-On-Reset circuit generates system reset pulses (RST) when the power supplier is from 1.62V to 3.6V. The output signal RST is positiv...

3474 1.0

GSMC 0.18µm 5v-5v/3v/1.8v Power Regulator This IP is a Low-Dropout (LDO) 5V to 5V/3V/1.8V power regulator in GSMC 0.18μm Logic/EFLASH process. The max rated output current of the PRG is 6...

3475 1.0

GSMC 0.18um 3.3v-1.8v Random code generator circuit, internal pattern frequency is 750MHz, sampling clock upto 250MHz. GSMC18_RCG_03 is to generate random code with the sampling clock up to 250MHz....

3476 1.0

GSMC 0.18um 3.3v/1.8v 80mA power regulator Present project is a regulator that generates 1.8v voltage from 3.3v power supply. Based on the GSMC 0.18um 3.3v process, it provides a maximum curren...

3477 1.0

GSMC 0.18um 3.3v RC oscillator with internal R and C to generate 32±20%KHz clock. The present IP is a RC oscillator with internal R and C to generate 32KHz±30% clock. Its power supply is 3.3V....

3478 1.0

GSMC 0.18um 3.3V Trimming Block This IP is suitable for voltage trimming. It provides 2 effuse bits, TRIM[1:0]. Before trimming, TRIM[1:0] are set to 1.8V and the output ports are hi...

3479 1.0

GSMC 0.18um VCC Detector The present IP is a VCC Detector (VDT) circuit. It detects the battery voltage level. It will generate two flag signals, VBT21 and VBT36, when VBT3 re...

3480 1.0

GSMC 0.18um VCC Detector The present IP is a VCC Detector (VDT) circuit. It detects the voltage level of both core (AVDD18) and I/O (AVDD33). It will generate four flag signal...

3481 1.0

GSMC RF 0.18um 1.8V APLL This IP is a programmable Analog PLL suitable for high speed clock generation. High speed VCO can run from 300MHz to 600MHz. By setting DM[4:0] and DN...

3482 1.0

TSMC 0.13um LVDS Transmitter The LVDS transmitter is designed to support Single Link transmission between Host and Flat Panel Display with up to SXGA+ resolution and Dual Link tra...

3483 1.0

TSMC 55nm 12-Bit 8-Input 1M/200k SAR ADC This analog-to-digital converter uses Successive Approximation Register (SAR) architecture to achieve 12-bit resolution. The IP includes a core intern...

3484 1.0

TSMC 55nm Analog 2-1 MUX This analog 2-1 MUX is designed for low speed application....

3485 1.0

TSMC 55nm 1.0/2.5V 32768Hz Crystal Oscillator This is a 32768Hz crystal oscillator specifically designed for ultra-low power application. The sole power supply is 3.3V, but it can be as low as 1.6...

3486 1.0

TSMC 65nm 12-Bit 8-Input 1M/200k SAR ADC This analog-to-digital converter uses Successive Approximation Register (SAR) architecture to achieve 12-bit resolution. The IP includes a core intern...

3487 1.0

TSMC 65nm Analog 2-1 MUX This analog 2-1 MUX is designed for low speed application....

3488 1.0

GLOBALFOUNDRIES 0.13um 12-Bit 8-Input 1M SAR ADC This analog-to-digital converter uses Successive Approximation Register (SAR) architecture to achieve 12-bit resolution. The IP includes a core intern...

3489 1.0

GLOBALFOUNDRIES 0.11um 12-Bit 8-Input 1M SAR ADC This analog-to-digital converter uses Successive Approximation Register (SAR) architecture to achieve 12-bit resolution. The IP includes a core intern...

3490 1.0

GLOBALFOUNDRIES 0.13um 3.3V-1.2V 200mA Synchronous Buck DC-DC The IP is a high efficiency, low ripple, current mode buck switching regulator with internal synchronous MOS switches, eliminating the need for extern...

3491 1.0

GLOBALFOUNDRIES 0.11um 3.3V-1.2V 200mA Synchronous Buck DC-DC The IP is a high efficiency, low ripple, current mode buck switching regulator with internal synchronous MOS switches, eliminating the need for extern...

3492 1.0

GLOBALFOUNDRIES 0.13um 1.2v APLL This IP is a programmable Analog PLL suitable for high speed clock generation. The high speed VCO of this PLL can run up to 1000MHz. It contains a 1-6...

3493 1.0

GLOBALFOUNDRIES 0.11um 1.2v APLL This IP is a programmable Analog PLL suitable for high speed clock generation. The high speed VCO of this PLL can run up to 1000MHz. It contains a 1-6...

3494 1.0

GLOBALFOUNDRIES 0.13um 1.2V POR Present Power on Reset generates system reset signal (RESET and RESETN) when 1.2V power (POR_VDD) rises to a specific level, i.e., Vtr....

3495 1.0

GLOBALFOUNDRIES 0.11um 1.2V POR Present Power on Reset generates system reset signals (RESET and RESETN) when 1.2V power (POR_VDD) rises to a specific level, i.e., Vtr....

3496 1.0

GLOBALFOUNDRIES 0.13um 3.3v-1.2v Power Regulator Targeted in GLOBALFOUNDRIES 0.13um 3.3v Logic process, current design of Power Regulator is to provide 1.2v power supply which is regulated from the s...

3497 1.0

GLOBALFOUNDRIES 0.11um 3.3v-1.2v Power Regulator Targeted in GLOBALFOUNDRIES 0.11μm 3.3v Logic process, current design of Power Regulator is to provide 1.2v power supply which is regulated from ...

3498 1.0

GF40nm 12-bit 1M/200K Single/Differential 2.5v Rail to Rail SAR ADC This analog-to-digital converter (ADC) uses successive approximation register (SAR) architecture to achieve 12-bit resolution. The ADC includes intern...

3499 1.0

GLOBALFOUNDRIES 40nm Low Power 1.1v/2.5v APLL This IP is a programmable Analog PLL suitable for high speed clock generation. The high speed VCO can run from 300MHz to 900MHz. By setting DM[3:0], D...

3500 1.0

GLOBALFOUNDRIES 40nm LP 2.5V/1.1V Power on Reset The present Power-On-Reset circuit generates system reset pulses (RST) when both the 2.5V and 1.1V power suppliers are turned on. Output signal RST11 ...