1 100.0

Fractal-D Amplifier SiliconIntervention applies an architectural approach to solving the real-world problem of maximizing efficiency in Class-D drivers over a wide range ...

2 3.0

Power Amplifier 0.7-1 GHz The IC1A comprises a low-band Doherty PA with Preamplifier, an input bypass switch , a power detector, a DPD coupling path, a temperature sensor all c...

3 2.0

Intermediate frequency amplifier with wide gain range Intermediate-frequency amplifier consists of 3-stages amplifier with tunable gain, AGC system, linear output buffer for differential analog output, an...

4 2.0

7 to 20 MHz Intermediate frequency amplifier The device is a dual Intermediate-frequency amplifier (IFA) which consists of 4-stage amplifier with tunable gain, an input linear buffer for analog o...

5 2.0

Low-Noise Amplifier 10-15GHz Low-Noise Amplifier 10-15GHz...

6 2.0

Low-Noise Amplifier 76-81 GHz The WEA7681L22G is an integrated low-noise amplifier with Gain Control block designed for Automotive Radar and mm-Wave Wireless Phase Arrays receiver ...

7 2.0

Low-Noise Amplifier 26-30GHz The WEA2630L45G is an integrated low-noise amplifier designed for Microwave Backhaul,5G Communications and mm-Wave Wireless Phase Arrays receiver appl...

8 2.0

Power Amplifier 26-30GHz The WEA2630P45G is an integrated power amplifier designed for Microwave Backhaul,5G Communications and mm-Wave Wireless Phase Arrays receiver applicat...

9 2.0

Power Amplifier 130-170GHz The WEA130170P55S consists of four cascaded differential amplifying stages. The first three stages are cascode stages,while the final one is a common ...

10 2.0

Power Amplifier 76-81GHz The WEA7681P22G is an integrated power amplifier designed for Microwave Backhaul,5G Communications and mm-Wave Wireless Phase Arrays receiver applicat...

11 1.0

900MHz, 2140MHz & 2700 MHz, 1 watt wide band Power Amplifier ...

12 1.0

900MHz, 2140MHz & 2700 MHz, 2 watt wide band Power Amplifier The RPW12A is 2 watt high linearity single-stage wide band Power Amplifier for the frequency range of 900MHz, 2140MHz & 2700 MHz implemented on InGaP ...

13 1.0

915MHz - 930MHz RPA12C Single stage low power low current PA ...

14 1.0

1550 to 1610 MHz low-noise amplifier 180TSMC_LNA_08 a low noise amplifier (LNA) is usually used as the first stage of receivers and is characterized by low noise figure and high linearity...

15 1.0

0 to 62 dB intermediate frequency amplifier The device is a dual Intermediate-frequency amplifier (IFA) which consists of 4-stage amplifier with tunable gain, an input linear buffer for analog o...

16 1.0

0.7-3 GHz Low noise amplifier The RGLNA01 is 0.7 to 3.0 GHz high efficiency GaAs Enhancement mode pHEMT Low Noise Amplifier IP Block .The device is designed for use in the IEEE 802...

17 1.0

2GHz-6GHz Low noise amplifier ...

18 1.0

1.7GHz-2.7GHz Two Stage Low Noise Amplifier A high efficiency CMOS 2 stage Low Noise Amplifier designed on 0.18µm SiGe BiCMOS process. The device is designed for use in the 802.11b/g and WLAN MI...

19 1.0

1.5GHz-1.7GHz Low Noise Amplifier RJL02 is a narrow band low noise amplifier. This LNA is designed on 0.18 SiGe BiCMOS process. This device is design for GPS system application....

20 1.0

2GHz-6GHz High Efficiency Broadband Low Noise Amplifier The RS03 is 2 to 6 GHz; high efficiency Broadband Single Stage Low noise amplifier, designed on 0.35-ìm SiGe BiCMOS technology. The device is designed...

21 1.0

SiGe BiCMOS WCDMA Power Amplifier The RJP01 is 1.920 to 1.980 GHz high efficiency WCDMA Power Amplifier. The Amplifier is designed using 0.18 um SiGe BiCMOS technology. Power amplifier...

22 1.0

SiGe BiCMOS WLAN Power Amplifier The RJP05 is 2.4 GHz to 2.5 GHz; high efficiency Power stage for WLAN Power Amplifier. The Amplifier is designed using 0.18um SiGe BiCMOS process for ...

23 1.0

InGaP HBT low power buffer amplifier The GEDA02 is 20 GHz to 40 GHz low power buffer amplifier. The amplifier is designed using 2 ìm InGaP HBT process for high frequency applications. ...

24 1.0

10-20GHz Differential Amplifier The GRDA1 is 10 GHz to 20 GHz differential amplifier designed on 2 um InGaP HBT process. The gain of GRDA1 is 5 dB typically with flatness of ±3dB ove...

25 1.0

2.4GHz-2.5GHz, 25dBm Power Amplifier ...

26 1.0

1Watts, 2.1-2.8GHz Power Amplifier ...

27 1.0

3 -4.5 GHz Power Amplifier ...

28 1.0

0.80-0.96 GHz 2Watts, 900MHz band Power Amplifier ...

29 1.0

2-8GHz Driver Amplifier ...

30 1.0

Driver Amplifier 8-16GHz ...

31 1.0

2 to 6 GHz Low Noise Amplifier Broadband Amplifier High Performance Low Current, Low Cost High Gain...

32 1.0

0.4-4GHz Wideband Low Noise Amplifier ...

33 1.0

1.7 to 2.5 GHz PCS/WCDMA band Low Noise Amplifier ...

34 1.0

1.7-2.5GHz Low Noise Amplifier with High OIP3 ...

35 1.0

7-20 GHz Driver Amplifier ...

36 1.0

3 to 10GHz Low Noise Amplifier for UWB Application ...

37 1.0

4.9 to 5.9GHz Power Amplifier ...

38 1.0

5 GHz Low Noise Amplifier ...

39 1.0

2 TO 6 GHz Driver Amplifier ...

40 1.0

Low noise amplifier for 28-40 Ghz frequencies for 5G, satcom and other applications RFLN05C is a four stage low noise amplifier. It provide high gain over wide bandwidth,low Noise Figure, high isolation, stability. The LNA is designed...

41 1.0

Low noise amplifier with lange couplers for 20-40 GHz frequencies for 5G , satcom and other applications RFLN03C is a three stage low noise amplifier with Lange Coupler at input & output side for perfect input and output matching to 50 ohms. It provides h...

42 1.0

Driver Amplifier operating from 10 - 24 GHz and can be used in wide band application or to drive the high-power amplifier RFDA02C Driver Amplifier operates from 10 - 24 GHz and can be used in wide band application or to drive the high-power amplifier. The amplifier provid...

43 1.0

Driver Amplifier operating from 1-16 GHz and can be used in wide band application or to drive the high-power amplifier RFDA07C Driver Amplifier operates from 1 - 16 GHz and can be used in wide band application or to drive the high-power amplifier. The amplifier provide...

44 1.0

Driver Amplifier operating from 35 - 46 GHz and can be used in Ka / V band applications or to drive the high-power amplifier RFDA12C Driver Amplifier operates from 35 - 46 GHz and can be used in Ka / V band applications or to drive the high-power amplifier. The amplifier pro...

45 1.0

Driver Amplifier operating from 35 - 39 GHz and can be used in Ka band applications or to drive the high power amplifier RFDA13C Driver Amplifier operates from 35 - 39 GHz and can be used in Ka band applications or to drive the high power amplifier. The amplifier provide...

46 1.0

Driver Amplifier operating from 24-30 GHz and can be used in wide band application or to drive the high-power amplifier RFDA06C Driver Amplifier operates from 24 – 30 GHz and can be used in Ka band application or to drive the high-power amplifier. The amplifier provides...

47 1.0

Buffer Amplifier operating from 10-45 GHz and can be used in wide band application or to drive the high power amplifier RFBA02C Buffer Amplifier operates from 10-45 GHz and can be used in wide band application or to drive the high power amplifier. The amplifier provides...

48 1.0

Low noise amplifier with lange couplers for 24-42 GHz frequencies for 5G , satcom and other applications RFLN06C is a four stage low noise amplifier. It provides high gain over wide bandwidth, low noise figure, high isolation, stability. The LNA is design...

49 1.0

Driver Amplifier operating from 37 - 40 GHz and can be used in Ka band applications or to drive the high-power amplifier. RFDA11C Driver Amplifier operates from 37 - 40 GHz and can be used in Ka band applications or to drive the high-power amplifier. The amplifier provide...

50 1.0

Buffer Amplifier operating from 25-62.5 GHz and can be used in Ka / V band application or to drive the high power amplifier. RFBA01C Buffer Amplifier operates from 25-62.5 GHz and can be used in Ka / V band application or to drive the high power amplifier. The amplifier prov...