Design & Reuse
84 IP
1
48.0
2-stage Power Amplifier 14.5GHz ultra-efficient Dual-Drive™ PA
This power amplifier product features Falcomm’s proprietary technology, the ultra-efficient Dual-Drive™ architecture, and was implemented using the Gl...
2
46.0
2-stage Power Amplifier 39GHz ultra-efficient Dual-Drive™ PA
Falcomm’s ultra-efficient Dual-DriveTM power amplifier technology is ideal for use in 5G mmWave and sub-6GHz applications. Our proprietary mmWave 2-st...
3
46.0
2-stage Power Amplifier 28GHz ultra-efficient Dual-Drive™ PA
Falcomm’s ultra-efficient Dual-Drive™ power amplifier technology is ideal for use in 5G mmWave and sub-6GHz applications. Our proprietary mmWave 2-sta...
4
15.0
Sub-GHz 868, 915MHz RF Transceiver
The ShortLink Sub-GHz Transceiver RF IP 'SL150_Sub1GHzTrx_1' is a complete mixed signal RF IP for the 868 and 915MHz frequency bands. It offers data r...
5
12.0
WiSUN Sub-GHz 433, 868, 915MHz Transceiver IP
The ShortLink Sub-GHz Transceiver RF IP 'SL40LP_Sub1GHzTrx_2' is a complete mixed signal RF IP for the 433, 868 and 915MHz frequency bands. It is comp...
6
12.0
Sub-GHz 433MHz RF Transceiver IP
The ShortLink Sub-GHz Transceiver RF IP 'SL150_433MHzTrx_1' is a complete mixed signal RF IP for the 433MHz frequency band. It offers a data rate of 1...
7
11.0
6Mhz to 5.8Ghz wideband half and full wave rectifier
The CC-205IP Wideband CMOS RF Rectifier is a CMOS full wave rectifier with a 6Mhz to 5.8Ghz rectification frequency range capability, can rectify inpu...
8
11.0
6 Mhz to 5.8Ghz RF Power Amplifer
The CC-204IP Wideband Power Amplifier is a paralleled, multi-stage RF Power Amplifier that possesses a variable 6Mhz to 5.8Ghz output frequency range ...
9
10.0
Up to 60GHz Divide By 2 Prescaler with I and Q outputs in GiGe
The PMCC_DIV60G is a high speed (up to 60GHz) fully differential static frequency divider by 2, designed using Jazz SiGe120 (SBC18HX) technology. Diff...
10
10.0
MIPI RFFE Master IP Core
The MIPI RFFE Master controller IP is a highly optimized and technology agnostic implementation of the MIPI RFFE v.3.1 standard targeting both ASIC an...
11
8.0
IGARFCS05A, TSMC CLN40LP 120MHz Resistance to Frequency Converter
IGARFCS05A is a 120MHz resistance to frequency oscillator without external component. It is designed to provide a stable and accurate reference clock ...
12
8.0
Sub-GHz 433, 868, 915MHz IEEE 802.15.4 RF Transceiver IP
The ShortLink Sub-GHz Transceiver RF IP 'SL40LP_Sub1GHzTrx_1' is a complete mixed signal RF IP for the 433, 868 and 915MHz frequency bands. It is comp...
13
5.0
Sub-GHz 330 to 470 MHz Ultra Low Power Transceiver IP
The ShortLink Sub-GHz Transceiver RF IP 'SL55S_Sub1GHzTRX_1' is a complete mixed signal RF IP for the 330 to 470 MHz frequency bands. Designed for hig...
14
4.0
TS-4x8 V-Band Array Antenna 4x8 Array Antenna, 57 – 67 GHz V-Connector 1.85 mm
The TS-4x8 V-Band Array Antenna is a 57 to 67 GHz planar antenna with a bore-sight gain of min. 14 dBi (18 dBi without feed losses) measured at V-conn...
15
3.0
60GHz Low Noise Amplifier
The 60 GHz LNA is a low noise amplifier designed for applications in the 57 – 64 GHz frequency range. This product is well suited for wireless LAN an...
16
3.0
60 GHz Power Amplifier
The 60 GHz PA is a power amplifier designed for applications in the 57 – 64 GHz frequency range. This product is well suited for wireless LAN and poi...
17
3.0
10GHz to 15GHz broadband wireless microwave transceiver front-end
The WEA1015T130G is a complete broadband wireless microwave transceiver front-end operating in the frequency band spanning from 10 GHz to 15 GHz. Impl...
18
3.0
10GHz to 15GHz broadband wireless microwave receiver front-end
The WEA1015R130G is a complete broadband wireless microwave receiver front-end operating in the frequency band spanning from 10 GHz to 15 GHz. Impleme...
19
3.0
76 GHz to 81 GHz FMCW Radar Transmitter
The WEA7681TX22G is a transmitter chain for radar applications covering the 76 GHz to 81 GHz automotive band. The transmitter chain consists of a prog...
20
3.0
76GHz to 81GHz FMCW Radar Receiver
The WEA7681RX22G is a complete Zero-IF receiver for radar applications covering the 76 GHz to 81 GHz automotive band. The receiver integrates a Low No...
21
3.0
High-performance RF front-end module for 5G mobile terminals
The WEA2630FE45G is a high-performance RF front-end module designed for 5G mobile terminals. The front-end combines a low noise high linearity LNA, a ...
22
2.0
RGMII I/O offerings
Certus is pleased to offer Reduced Gigabit Media Independent Interface (RGMII) compliant IOs in advanced technology nodes. The Certus solutions suppo...
23
2.0
Secure Digital I/O offerings
Certus is pleased to offer Secure Digital compliant IOs in advanced technology nodes. Our SD IOs support DS, HS, SDR25, SDR50, DDR50 and SDR104 prot...
24
2.0
Combined GNSS/TV/FM multi-frequency receiver
NT2024 is a 4-channel RF front end designed to perform a simultaneous reception, conversion, filtering and amplifying of * GPS/Galileo/GLONASS/Be...
25
1.0
Wifi Receiver, 2402-2480 MHz - GlobalFoundries 22nm
Wifi Receiver, 2402-2480 MHz - GlobalFoundries 22nm...
26
1.0
Programmable RF attennuator - GlobalFoundries 130nm RFSOI
Programmable RF attennuator - GlobalFoundries 130nm RFSOI...
27
1.0
Wireline Transceiver
This IP can be used for BPSK RF communication through a signal wire. Originally it was designed for use with V1 USB PD. However, it is a generic block...
28
1.0
Complete RF Transceiver 5.8GHz
Complete RF Transceiver 5.8GHz...
29
1.0
VHF/ UHF/L (DVB-H, DMB and ISDB-T) RF Front-end
The NT1022 is multiband multistandard direct-conversion TV tuner designed for Mobile Digital TV applications. The TV tuner supports DVB-H, DVB-T, IP-D...
30
1.0
GLONASS/GPS/Galileo/BeiDou multisystem single-band 2-channel receiver RFIC
NT1021 is a single-chip dual-channel RF front-end consuming a very low power (47 mW typical at 2.1 V) and performing a simultaneous reception of both ...
31
1.0
13.56MHz NFC Transceiver IP
The IP is NFC Transceiver AFE which includes microcontroller and memories integration, power management unit, clock management unit, peripheral interf...
32
1.0
RF SPDT Switch from 10-30 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW01C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....
33
1.0
RF SPDT Switch from 20-40 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW05C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....
34
1.0
RF SP3T Switch used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW02C RF SP3T Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....
35
1.0
Front End Module operating from 24 – 30 GHz and can be used in low power Ka band applications
RFFEM01C Front End Module operates from 24 – 30 GHz and can be used in low power Ka band application. The input and output are matched to 50 ohms with...
36
1.0
Front End Module operating from 2 – 7 GHz and can be used in S / C band for Wi-Fi 6 & SATCOM applications.
RFFEM02C Front End Module operates from 2 – 7 GHz and can be used in S / C for Wi-Fi 6 & SATCOM applications. The input and output are matched to 50 o...
37
1.0
Up convert LO reject Mixer used in RF transceiver applications
RFUD01C (UPC Mixer) is LO reject Mixer used in RF transceiver applications. The process used to design UPC Mixer is 0.1um GaAs pHEMT. This is singly b...
38
1.0
Downconverter IR SSB Mixer used in receives
RFDN02C (DNC Mixer) is IR SSB Mixer used in receive application. The process used to design DNC Mixer is 0.1um GaAs pHEMT. This Mixer employs two resi...
39
1.0
Active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency
RFDBL03C is an active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency within the IC to feed in and drive th...
40
1.0
Active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency
RFDBL04C is an active frequency doubler, designed for use in the LO Path after VCO to double up the LO frequency within the IC to feed in and drive th...
41
1.0
DNC IR SSB Mixer used in transceiver applications
RFDN03C (DNC Mixer) is IR SSB Mixer used in transceiver application. The process used to design DNC Mixer is 0.1um GaAs pHEMT. This Mixer employs two ...
42
1.0
RF SPDT Switch from 20-40 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW04C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....
43
1.0
RF SPDT Switch from 2-44 GHz used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation
RFSW03C RF SPDT Switch is used in TDD (Time Division Duplexing) mode for switching between TX and RX path with low loss, broadband and high isolation....
44
1.0
VeriSilicon Bluetooth Low Energy (BLE) RF IP
Bluetooth Low Energy (BLE) RF IP provides a transceiver designed for Bluetooth Smart applications. It is compliant with the BLE specification (part of...
45
1.0
VeriSilicon 400MHz 802.15.4g RF IP
LIGHT is a RF IP supporting general modulation modes on 433MHz~510MHz band. The IP is designed to support 3.3V operation voltage with SMIC 55nm proces...
46
1.0
VeriSilicon Bluetooth Dual-Mode (BTDM) RF IP
Dual-mode Bluetooth RF IP is s a 2.4GHz ISM Band RF Transceiver IP which is designed for Bluetooth dual mode applications. It is compliant with the Bl...
47
1.0
VeriSilicon 802.11ah RF IP
802.11ah RF IP is a complete radio system for signal transmission and reception over wireless channels on the 863-928 MHz ISM frequency band. Its fun...
48
1.0
VeriSilicon Multi-mode GNSS RF IP
GF22FDSOIV08_GNSS_01 is a GNSS RF receiver which is designed to support GPS L1, Beidou B1, Galileo E1 and Glonass G1 modes. Moreover, L2, L5, B2 and B...
49
1.0
RF Buffer, CMOS, Push-Pull, Fmax 8GHz, for External Drive - GlobalFoundries 55nm
RF Buffer, CMOS, Push-Pull, Fmax 8GHz, for External Drive - GlobalFoundries 55nm...
50
1.0
RF Buffer, CMOS, Push-Pull, Fmax 8GHz, for External Drive - STMicroelectronics 65nm
RF Buffer, CMOS, Push-Pull, Fmax 8GHz, for External Drive - STMicroelectronics 65nm...