Analog & Mixed Signal IP Core

The Real Time Clock (RTC) SGC22300 uses the leading oscillator solution SGC21510. This specially designed RTC core uses advanced analog design techni...

2752

1.0

RTC Real time Clock With Oscillator Nano Power Series - SMIC 40nm

The Real Time Clock (RTC) SGC22300 uses the leading oscillator solution SGC21510. This specially designed RTC core uses advanced analog design techni...

2753

1.0

RTC Real time Clock With Oscillator Nano Power Series - TSMC 40nm

The Real Time Clock (RTC) SGC22300 uses the leading oscillator solution SGC21510. This specially designed RTC core uses advanced analog design techni...

2754

1.0

RTC Real time Clock With Oscillator Nano Power Series - TSMC 65nm

The Real Time Clock (RTC) SGC22300 uses the leading oscillator solution SGC21510. This specially designed RTC core uses advanced analog design techni...

2755

1.0

RTC Real time Clock With Oscillator Nano Power Series - TSMC 90nm

The Real Time Clock (RTC) SGC22300 uses the leading oscillator solution SGC21510. This specially designed RTC core uses advanced analog design techni...

2756

1.0

Stereo PCM to PWM Converter, SMIC 0.18um

The AR35S18E is a digitally coded conversion IP that translates stereo 16-24bit pulse-code modulated (PCM) input data into pulse-width modulated (PWM)...

2757

1.0

Attack Detector Top

The attack detector top consists of a reference generator, a 1.8V analog supply SAD, a 1.2V analog supply SAD, a 0.75V digital supply SAD, a temperatu...

2758

1.0

Dual voltage detector , 3.7V supply - TSMC 180nm

Dual voltage detector , 3.7V supply - TSMC 180nm...

2759

1.0

Dual WideBand Frequency Synthesizer with Integrated VCO and Loop Filter

CorePLL is a wideband phase-locked loop (PLL) system for 2G (GSM) 3G and 4G (LTE), including Carrier Aggregation (CA) for 3GPP Rel11 and Rel12. CorePL...

2760

1.0

Sub-LVDS receiver followed by 1:4 de-serializer

The S13V25_CCP2RX _01 recovers a serial bit stream containing image data and converts it to a 4-bit 1/4 rate word. The receiver defined in this IP is ...

2761

1.0

Successive Approximation ADC_2M10b

Innosilicon SARADC IP is a small-sized, low power analog to digital converter with input channels. The converter is a charge-redistribution successive...

2762

1.0

Successive Approximation ADC_2M12b

Innosilicon SAR-ADC IP is a small-size, low power analog to digital converter. The converter is a charge-redistribution successive approximation ADC. ...

2763

1.0

Successive Approximation ADC_3M10b

Innosilicon SARADC IP is a small-sized, low power analog to digital converter with input channel and Standard I/O multiplexed. The converter is a char...

2764

1.0

Buck-Boost Multiple Output Charge Pump

SGC47020_01_TSMC_CV018MH is a multiple output buck-boost charge pump capable of providing 6 different voltage output conversion ratios. Making use of ...

2765

1.0

Audio ADC with 100 dB Dynamic Range, 24-bit six channel with embedded VAD

The YANZI-A-hexADC-VD.01 is a feature-rich audio ADC which provides the insurance of the best sound quality after integration into Smart Speaker inc...

2766

1.0

audio clock Generation, output nine kinds of 256*fs from 12M reference input

This PLL is designed for audio clock generation. The reference clock is 12MHz crystal or input clock. It supports 256*fs clock output, here fs is audi...

2767

1.0

Audio Codec

INNOSILICON™ Audio Codec IP is a low power, high resolution, stereo audio solution which leverages Sigma-Delta noise-shaping technology. The ADC, DAC,...

2768

1.0

Audio CODEC with 100 dB Dynamic Range, 24-bit stereo PWM DAC, six-channel ADC

YANZI-A-hexCOD-MT1-LR-VD.02 is a high-performance audio CODEC with 6 analog-to-digital converters (ADC) ensuring the most precise far-field vocal reco...

2769

1.0

Audio CODEC with 100 dB SNR, 24-bit stereo channels and cap-less headphone driver

The sCODS100-LB-IO-N.15 is a feature-rich audio CODEC which provides the insurance of the best sound quality after integration into application proces...

2770

1.0

Audio codec with capacitor-less 104 dB dynamic range ADC and 100 dB DAC

The sCOD100-uLP-H1-LR-D.02 is a mixed (analog and digital) Virtual Component containing a stereo ADC, a stereo DAC with headphone amplifier, and addit...

2771

1.0

Audio codec with capacitor-less 106 dB dynamic range ADC and 100 dB DAC with very low latency filters

The sCOD100-uLP-ANC-H1-LR-D.02 is a mixed (analog and digital) Virtual Component containing a stereo ADC, a stereo DAC with headphone amplifier, and a...

2772

1.0

Audio codec with capacitor-less 106 dB dynamic range ADC and 100 dB DAC with very low latency filters

The sCOD100-uLP-ANC-H1-LR-D.02 is a mixed (analog and digital) Virtual Component containing a stereo ADC, one mono DAC with headphone amplifier, and ...

2773

1.0

Audio DAC, Sigma Delta, 20kHz BW, >80dB SNR

Audio DAC, Sigma Delta, 20kHz BW, >80dB SNR...

2774

1.0

Buffer Amplifier operating from 10-45 GHz and can be used in wide band application or to drive the high power amplifier

RFBA02C Buffer Amplifier operates from 10-45 GHz and can be used in wide band application or to drive the high power amplifier. The amplifier provides...

2775

1.0

Buffer Amplifier operating from 25-62.5 GHz and can be used in Ka / V band application or to drive the high power amplifier.

RFBA01C Buffer Amplifier operates from 25-62.5 GHz and can be used in Ka / V band application or to drive the high power amplifier. The amplifier prov...

2776

1.0

Built-in crystal oscillator

...

2777

1.0

Multiplexer 2x 16 to 1 - XFAB 180nm

Multiplexer 2x 16 to 1 - XFAB 180nm...

2778

1.0

Output driver stage for DCDC - TSMC 180nm

Output driver stage for DCDC - TSMC 180nm...

2779

1.0

5V 16-ch 12-bit 1MSPS ADC

This IP is gds completed and was verified by simulation. Silicon validation will be in December 2011. This IP is a 12-bit, 1MSPS, Analog - to - Digita...

2780

1.0

1V Power On Reset

The power on reset can provide system a reset signal to SoC. The power on reset contains a voltage detection block and a delay cell. The power on rese...

2781

1.0

5V to 1.5V Linear Voltage Regulator

The ll_reg1301s01_bcd1370_4lm is a Li-Ion battery voltage to 1.5V linear voltage regulator with 300mA current driving capability. It works from –40°C ...

2782

1.0

3V-5V Charge Pump for USB OTG

This is a 3V to 5V regulated charge pump that will provide up to 100mA output current. This charge pump mainly targets on the application in USB2.0 OT...

2783

1.0

LVDS interface Driver, Fmax 600MHz - XFAB 180nm

LVDS interface Driver, Fmax 600MHz - XFAB 180nm...

2784

1.0

LVDS receiver, 650M, 5 channel

The LVDS Receiver IP is designed to support Single Link transmission between Host and Flat Panel Display with up to SXGA+ resolution and Dual Link tra...

2785

1.0

Over-voltage Protection Module to handle direct connection of voltage regulators to a 5V battery using standard 1.8V devices

Over-voltage Protection Module to handle direct connection of voltage regulators to a 5V battery using standard 1.8V IO devices...

2786

1.0

Over-voltage Protection Module to handle direct connection of voltage regulators to a 5V battery using standard 2.5V OD 3.3V devices

Over-voltage Protection Module to handle direct connection of voltage regulators to a 5V battery using standard 2.5 OD 3.3V devices...

2787

1.0

Over-voltage Protection Module to handle direct connection of voltage regulators to a 5V battery using standard 2.5V OD 3.3V devices

Over-voltage Protection Module to handle direct connection of voltage regulators to a 5V battery using standard 2.5 OD 3.3V devices...

2788

1.0

Over-voltage Protection Module to handle direct connection of voltage regulators to a 5V battery using standard IO devices

Over-voltage Protection Module to handle direct connection of voltage regulators to a 5V battery using standard IO devices...

2789

1.0

Over-voltage Protection Module to handle Over-voltage operation (up to 5.5 V) while using standard process 3.3 V devices

Dolphin Design provides a complete Power Management IPs platform, toward three objectives: To standardize and ease Power Regulation Network integrat...

2790

1.0

Over-voltage Protection Module to handle Over-voltage operation (up to 5.5 V) while using standard process 3.3 V devices

Dolphin Design provides a complete Power Management IPs platform, toward three objectives: To standardize and ease Power Regulation Network integrati...

2791

1.0

Over-voltage Protection Module to handle Over-voltage operation (up to 5.5 V) while using standard process 3.3 V devices

Dolphin Design offer a Reusable Power Kit Library toward three objectives: To standardize and ease Power Regulation Network integration To enable di...

2792

1.0

Over-voltage Protection Module to handle up to 5.5 V using standard process 3.3 V devices - High temperature (Grade 1, Tj=150�)

Dolphin Design provides a complete Power Management IPs platform, toward three objectives: To standardize and ease Power Regulation Network integrati...

2793

1.0

PVT Detector

PVT Detector is a unique solution intended to continuously monitor IC status at several on-die locations. It is able to detect manufacturing process d...

2794

1.0

PVT Sensor

The PVT sensor indicates the junction temperature as a 12-bit binary digital code. It contains a main sensor, remote probes and an Analog-to-Digital C...

2795

1.0

1Watts, 2.1-2.8GHz Power Amplifier

...

2796

1.0

Switch SP2T, 2.5GHz - GlobalFoundries 130nm RFSOI

Switch SP2T, 2.5GHz - GlobalFoundries 130nm RFSOI...

2797

1.0

Switch with 0/20dB Attenuator

...