Design & Reuse
arrow AMBA AHB / APB/ AXI (192)
arrow CXL (18)
arrow D2D (58)
arrow Gen-Z (6)
arrow HDMI (83)
arrow I2C (98)
arrow Interlaken (2)
arrow MIL-STD-1553 (3)
arrow MIPI (460)
arrow Multi-Protocol PHY (37)
arrow PCI (254)
arrow RapidIO (6)
arrow SAS (6)
arrow SATA (95)
arrow Smart Card (6)
arrow USB (390)
arrow V-by-One (22)
arrow VESA (73)
arrow Other (66)
98 IP
51
10.0
I2C and SPI Master/Slave Controller
The I2CSPI-CTRL is a compact and versatile serial interface controller supporting both SPI (Serial Peripheral Interface) and I2C (Inter-Integrated Cir...
52
9.0
I2C Controller
I²C (Inter-Integrated Circuit) Controller is a two-wire, bi-directional serial bus that provides simple and efficient method of data transmission over...
53
9.0
I2C Slave
The I²C slave IP is fully synthesizable core and compatible with Phillips I²C standard. The IP uses I²C Bus Protocol which helps maximize the hardware...
54
6.0
I2C Master/Slave Controller Core IP
I2C Master/Slave Controller core implements a bidirectional serial interface compatible with the NXP’s I2C bus specification and supports all transfer...
55
5.0
I2C Master Serial Interface Controller
The CC-I2C_MST-AXI is a synthesisable Verilog model of a I2C serial interface controller. The I2C core can be efficiently implemented on FPGA and ASIC...
56
5.0
MIPI-I3C Combo IP Host/Target HDR-DDR compliance with Spec v1.1.1
MIPI I3C(Improved Inter Integrated Circuit) is a two-wire bidirectional serial Bus for sensors communication. The MIPI I3C interface has been develope...
57
4.0556
I3C and I2C Combo
It supports standard I3C, high-speed I3C, and Ultra-higher-speed I3C modes. Push-pull operation in I3C modes. Supports I2C standard mode, fast mode, f...
58
4.0556
Open-drain I2C and SMBUS, DDC, CEC & HPD IO offerings
Certus is pleased to offer I2C open-drain IOs across multiple process technologies. The Certus I2C IO can support external supplies of 1.8V, 3.3V and...
59
4.0
I2C Master Controller
The ntI2C_M is an I2C-bus multi-master interface controller and provides a cost-effective solution for a wide range of applications that require a low...
60
3.0
I2C Master / Slave Controller w/FIFO (AHB & AHB-Lite Bus)
The Digital Blocks DB-I2C-MS-AHB Controller IP Core interfaces a microprocessor via the AHB system Interconnect Fabric to an I2C Bus. The I2C is a t...
61
3.0
I2C Master / Slave Controller w/FIFO (APB Bus)
The Digital Blocks DB-I2C-MS-APB Controller IP Core interfaces a microprocessor via the APB system Interconnect Fabric to an I2C Bus. The I2C is a t...
62
3.0
I2C Master Controller w/FIFO (APB Bus)
The Digital Blocks DB-I2C-M-APB Controller IP Core interfaces an ARM, MIPS, PowerPC, ARC, or other high performance microprocessor via the AMBA 2.0 AP...
63
3.0
I2C Slave Controller - Low Power, Low Noise Config of User Registers
The DB-I2C-S-SCL-CLK is an I2C Slave Controller IP Core focused on low power, low noise ASIC / ASSP designs requiring the configuration & control of r...
64
3.0
I2C Slave Controller w/FIFO (APB or AHB or AHB-Lite or AXI-Lite Bus)
The Digital Blocks DB-I2C-S-APB / DB-I2C-S-AHB / DB-I2C-S-AXI / DB-I2C-S-AVLN Controller IP Core interfaces an ARM, MIPS, PowerPC, ARC,NIOS II or othe...
65
3.0
Hs-Mode I2C Controller - 3.4 Mbps, Master / Slave w/FIFO
The Digital Blocks DB-I2C-MS-Hs-Mode Controller IP Core interfaces a microprocessor via the AMBA AXI / AHB / APB Bus or Avalon / Qsys Bus to an I2C Bu...
66
2.5
I2C Master
The MI2CM macro implements a synchronous single-chip I2C Master only Macro capable of linking one CPU to one I2C-bus. Communication with I2C-bus is ca...
67
2.5
I2C MAster Slave
The MI2CMS macro implements a synchronous single-chip I2C Master and Slave Macro capable of linking one CPU to one I2C-bus. Communication with I2C-bus...
68
2.5
I2C Slave
The MI2CS macro implements a synchronous single-chip I2C Slave Macro capable of linking one CPU to one I2C-bus. Communication with I2C-bus is carried ...
69
2.0
I2C Master Serial Interface Controller
Master serial interface compatible with the popular Philips® I2C standard. Features a simple command interface and permits multiple I2C slaves to be c...
70
2.0
I2C Slave Serial Interface Controller
Slave serial interface compatible with the popular Philips® I2C standard. Permits an I2C Master to communicate with your FPGA, CPLD or ASIC device. A...
71
1.0
I2C Bus Interface
The serial controller interface (Single Master) core uses a two-wire bus for communicating between integrated circuits or standard peripherals like sm...
72
1.0
I2C Master / Slave Controller w/FIFO (AXI & AXI-Lite Bus)
The Digital Blocks DB-I2C-MS-AXI Controller IP Core interfaces a microprocessor via the AXI system Interconnect Fabric to an I2C Bus. The I2C is a t...
73
1.0
I2C Master and Slave
I2C is a two-wire, bi-directional serial bus that provides a simple and efficient method of data exchange between devices. It is most suitable for app...
74
1.0
Serial Controller Interface
Inicore’s iniSCI Slave is a synthesizable, flexible, and structured VHDL implementation of a Serial Controller Interface (SCI) that uses a two-wire bu...
75
1.0
PSMBUS - DPSMBUS - SMBUS & PMBUS Master/Slave controller
The DPSMBUS is a fully-featured module based on the I2C protocol, which supports SMBus and PMBus functionalities. It can operate as a DPSMBUSM – Ma...
76
0.3729
I2C Controller & PHY
DTI I2C Controller provides the logic consistent with NXP I2C specification to support the communication of low-speed integrated circuits through I2C ...
77
0.3729
Dolphin I2S Controller & PHY
DTI I2S Controller provides an interface between system bus and Inter-IC Sound devices. The controller is compliant with NXP Inter-IC Sound Bus Specif...
78
0.0
128 Channel Analog Front-End
PMCC_XCM_64X64_A IP block is a 128 channels analog front-end. The IP block consists of 128 variable gain amplifiers (VGAs), 128 2-bit digitizers, bias...
79
0.0
I2C Bus Master / Slave Controller Interface with FIFO
The I2C is a two-wire, bi-directional serial bus, which provides a simple and efficient method of short distance data transmission between many device...
80
0.0
I2C Bus Master Controller Core
The I2C-MS core is a controller for the Inter-Integrated Circuit (I2C) bus. The highly configurable core can implement an I2C bus master, slave, or a ...
81
0.0
I2C Host / Device Bus Controller
The synchronous I2C interface is a block that interconnects an APB bus. The APB - I2C Bridge interfaces to the APB bus on the system side and the I2C ...
82
0.0
I2C Master / Slave Controller with FIFO (AXI & AXI-Lite Bus)
The I2C is a two-wire, bi-directional serial bus, which provides a simple and efficient method of short distance data transmission between many device...
83
0.0
I2C Master Controller w/FIFO (AHB & AHB-Lite Bus)
The Digital Blocks DB-I2C-M-AHB Controller IP Core interfaces an ARM, MIPS, PowerPC, ARC, or other high performance microprocessor via the AMBA 2.0 AP...
84
0.0
I2C Master Controller w/FIFO (AXI & AXI-Lite Bus)
The Digital Blocks DB-I2C-M-AXI Controller IP Core interfaces an ARM, MIPS, PowerPC, ARC, or other high performance microprocessor via the AMBA 2.0 AX...
85
0.0
I2C Master IP
I2C Master interface provides full support for the two-wire I2C synchronous serial interface, compatible with I2C version 6.0 specification. Through i...
86
0.0
I2C Slave Controller - Low Power, Low Noise Config with APB Interface
The Digital Blocks DB-I2C-S-SCL-CLK-APB Controller IP Core interfaces an ARM, MIPS, PowerPC, ARC or other high performance microprocessor via the AMBA...
87
0.0
I2C Slave Controller w/FIFO (AHB Bus)
The Digital Blocks DB-I2C-S-AHB Controller IP Core interfaces an ARM, MIPS, PowerPC, ARC or other high performance microprocessor via the AMBA 2.0/3.0...
88
0.0
I2C Slave Controller w/FIFO (APB Bus)
The Digital Blocks DB-I2C-S-APB Controller IP Core interfaces an ARM, MIPS, PowerPC, ARC or other high performance microprocessor via the AMBA 2.0 APB...
89
0.0
I2C Slave Controller w/FIFO (AXI Bus)
The Digital Blocks DB-I2C-S-AXI Controller IP Core interfaces an ARM, MIPS, PowerPC, ARC or other high performance microprocessor via the AMBA 4/3 AXI...
90
0.0
I2C Slave Controller with User Register Array / Memory / FIFO / AMBA Interface
The DB-I2C-S-REG is an I2C Slave Controller IP Core focused on low VLSI footprint ASIC / ASSP designs interfacing to user registers while autonomous i...
91
0.0
I2C Slave IP
I2C Slave interface provides full support for the two-wire I2C synchronous serial interface, compatible with I2C version 6.0 specification. Through it...
92
0.0
I2C Slave To AHB Bridge IP
I2C Slave To AHB Bridge interface provides full support for the two-wire I2C synchronous serial interface, compatible with I2C version 6.0 specificati...
93
0.0
I2C Slave To AXI Bridge IP
I2C Slave To AXI Bridge interface provides full support for the two-wire I2C synchronous serial interface, compatible with I2C version 6.0 specificati...
94
0.0
I2CM - DI2CM - I2C Bus Interface - Master
The I2C is a two-wire, bi-directional serial bus, that provides a simple and efficient method of short distance data transmission between many devices...
95
0.0
I2CMS - DI2CMS - I2C Bus Interface - Master/Slave
The DI2CMS is a flexible and robust interface solution that bridges microprocessors with an I2C (Inter-Integrated Circuit) bus, offering support for b...
96
0.0
I2CS - DI2CS - Slave I2C bus controller with FIFO
The DI2CS core provides an interface between a microprocessor / microcontroller and I2C bus. It can work as: - a slave transmitter or - slave rece...
97
0.0
I2CSB - DI2CSB - I2C Bus Interface Slave -Base version
The I2C is a two-wire, bi-directional serial bus, which provides a simple and efficient method of short distance data transmission between many device...
98
0.0
MIPI RFFE SPI I2C Slave IP
MIPI RFFE SPI I2C Slave interface provides full support for the two-wire MIPI RFFE synchronous serial interface with SPI and I2C overlay, compatible w...